|
DETMAR's Aeroline vents provide a flush (only 1/8" installed height), sleek appearance to exterior and interior venting. The very low profile of the Aeroline vents blend into hull and deck surfaces. Sized to fit and easy to install on highly contoured surfaces or where space is restricted. Air openings will accommodate 3" or 4" ventilation systems. Vent measures: 2 1/2" wide 17" long, 1/8" flush height. Installation hole size: 2" x 15-1/2" (installs with four #8 screws). Fits 7-2-24 and 7-2-26 collector boxes.
|
Aeroline Vent, black |
|
Aeroline Vent, white |
DETMAR's Vector vents blend into any mounting surface to give that "designed in" appearance. The Vector vent is sized to fit most applications and may be ganged end-to-end for larger boat installations. The vent measures 2-1/2" wide, 18-1/2" long, 11/16" flush height. Cut out is 1-15/16" x 15-3/8". Fits 7-2-24 or 7-2-26 collector boxes.
7-2-18 |
Vector Louvered Vent, black |
7-2-19 |
Vector Louvered Vent, white |
Measures 17" long, 3-1/8" high and 1" deep with 15/16" flush height. Cut out is 15-1/2" by 2-1/4.
7-2-4 |
Low Profile Louvered Vent, black |
7-2-5 |
Low Profile Louvered Vent, white |
Measures 14" long, 5-3/4" high and 1" deep with 1/2" flush height. Cut out is 12-1/4" by 3-3/4".
7-2-1 |
Louvered Vent, white |
7-2-2 |
Louvered Vent, black |
Accommodates 4" hose. Special clips on the hose flange eliminate need for hose clamps. Measures 5-1/8" by 5-1/8", 3/4" flush height.
7-2-8 |
Round Louvered Vent, black |
7-2-9 |
Round Louvered Vent, white |
| 7-4-6 |
Hose flange Polyethylene |
| |
Fits 3" hose |
|
